Cubis^® II, MCA Firmware Update

How Do I Update the Software Now to Ensure the Optimal Functionality of My Cubis^® II Balance?

Please Follow the Steps Below:

1. Download the firmware package from our website by filling out the form below.
2. Extract the zipped firmware package.
3. Copy the files into the root directory of a USB drive or another connector.
4. Login to the balance with the right to access the balance settings menu.
5. Use the [Setup] button to open the menu for the settings of the balance.
6. Navigate to menu [Device maintenance] -> [Update firmware].
7. Select the connector for upload.
8. The device shows all files found in a valid file format via the connector. Select the desired update file.
9. The device displays a confirmation prompt with the selected file. To update the device now, select the [Continue] button.
10. The device will now automatically start the update process. The file is transferred to the device, a data backup is stored on the internal memory and any necessary data structures are updated after the restart. This process may take several minutes depending on the available data. The balance must not be disconnected from the power supply during this time.
11. To update the QApp Center log in at the balance again and access the settings.
12. Navigate to menu [Device maintenance] -> [Update QAPP Center].
13. The device displays a confirmation prompt with the selected file. To update the device now, select the [Continue] button.
14. The device will now automatically start the update process. Wait until the update process is finished. Please note that a new task must be installed to use a new QApp version.