This page does not exist in your selected language. Your preference was saved and you will be notified once a page can be viewed in your language.
This page is also available in your prefered language. Switch to that version.
Extend the performance capabilities of your Quintix® and Secura® with accessories from our comprehensive range:
Thermal transfer printer* for GxP printouts on standard paper, continuous-length label paper rolls or individual labels; for connection to a USB port...
Direct thermal printer for printouts on standard paper or continuous-length paper label rolls; for connection to a USB port or an RS232 interface port...
External rechargeable battery pack for standard laboratory balances.
Density determination kit for solids and liquids; for balances with a readability of 0.01 mg.
Density determination kit for solids and liquids; for balances with a readability of 0.1 mg or 1 mg.
Density determination kit for solids and liquids; for balances with a readability of 10 mg (supplied without a balance).
Pipette calibration kit (hardware) for balances with a readability of 0.01 mg. The kit consists of a moisture trap and all required adapters.
Draft shield for balances with a readability of 10 mg.
Round glass draft shield for balances with a readability of 1 mg (supplied without a balance).
Special pan with a 130 mm diameter for weighing filters; for balances with a readability of 0.01 mg.
Weighing pan with an 80 mm diameter, slotted; for increasing the weighing performance of balances with a readability of 0.01 mg.
Weighing pan with a 90 mm diameter; includes conversion kit; for balances with a readability of 0.01 mg.
Interior glass draft shield for increasing the weighing performance of balances with a readability of 0.002 mg (supplied without a balance).
Stainless steel weighing pan with a 50 mm diameter for balances with a readability of 0.002 mg. The set consists of a weighing pan, a low-design and a high-design round pan draft shield (supplied without a balance).
69Y03285Standard paper and ink ribbon set for YDP30 laboratory printer
69Y03286Self-adhesive paper and ink ribbon set for YDP30 laboratory printer
69Y03287Standard paper for YDP 30 | YDP40 lab printers
69Y03288Self-adhesive paper for direct thermal printing for YDP30 | YDP40 laboratory printer
YCC04-D09Data cable, mini USB|USB A
YCC03-D09Data cable, mini USB|RS232, 9-pin
YCC03-D25Data cable, mini USB|RS232, 25-pin
YDB-SECURA-5Demo box for 0.01 mg or 0.002 mg balances
YDB-SECURADemo box for 0.0001 g or 0.001 g balances
YDB-SECURA-PDemo box for 0.01 g balances
6960SE05In-use covers for balances with a readability of 0.01 mg or 0.002 mg
6960SE01In-use covers for balances with a readability of 0.1 mg or 1 mg
6960SE02In-use covers for balances with a readability of 0.01 g|0.1 g|1 g
6960SE04Dust cover for balances with a readability of 0.01 mg or 0.002 mg
6960SE03Dust cover for balances with a readability of 0.1 mg or 1 mg
YIB01-0URIonizing blower for eliminating electrostatic charges on sample containers and samples
YSTP01Stat-Pen ionizing probe for neutralizing electrostatic charges on samples and filters
YWT09Wooden balance table with natural stone inset for precise, reliable weighing
YWT03Balance table made of natural stone, with vibration dampeners
YWT04Wall console for micro, analytical and precision balances
641214Weighing scoop made of chrome nickel steel, 90 mm × 32 mm × 8 mm
6565-250Aluminum weighing scoops, 4.5 mg (pkg. of 250) for micro balances
6566-50Aluminum weighing scoops, 52 mg (pkg. of 50) for micro balances
Please select your country so we can show you products that are available for you.
The content of our website is always available in English and partly in other languages. Choose your preferred language and we will show you the content in that language, if available.
Shop Sartorius Products Now